For instructions on how to update your HD WiFi Camera firmware, see Update your HD WiFi Camera System Firmware. Zrazok zoshita samoosvti vihovatelya. Identify your WiFi Camera Firmware Version Follow the instructions in Identify your WiFi Camera Firmware Version to determine if your WiFi Camera requires updating.

The Sricam SP012 brings back memories with its casing introduced in 2008 by Foscam for their famous and widely used since. The camera setup through the mobile app is fool and fail proof. Additional instructions can be obtained from. Other ways to access the camera are grouped on this page: (Nov.2016, no longer true, most links are dead now) The Sricam app is the main user interface for the camera since it has no web server.

The services available are UPnP/5000 and RTSP/554 only. Onvif compliant viewers can detect the SP012 on the port 5000. Other software, like VLC, can use the RTSP stream: rtsp://ipcam:554/onvif1 for HD (1280 x 738) Note: Several users reported being unable to get the HD stream through RTSP. I'm puzzled as to why their camera gives different results than my sample, which streams in HD (bitrate up to 1200kbps) using fw v.14.00.00.52/HardwareId 2.1.

ONVIF Setup in IP Cam Viewer Onvif and RTSP streams from IP Cam Viewer No IR-Cut means pinkish foliage in broad daylight. Picture quality: The GM8135S chipset (cheaper Hi3518 equivalent) is in charge of the picture quality and assisted with IR LED for the night vision. Both the lack of IR-Cut feature, and the absence of IR LED manual control makes the camera a bad candidate for watching your driveway or garden by the window. Two-way audio quality is adequate but I was expecting a stronger speaker in this larger model. In fact it compares with the. There is no audio connector for an external speaker.

Conclusion: The is (at time of writing) the cheapest IP Camera with Pan & Tilt at Gearbest (). Despite that, it does the job as advertised as an indoor camera. For those valuing the size over the P&T feature, the tiny / (IR-cut version) is a better option. I have sricam sp012. Camera works fine when I got it.

But in few day later, I decide to use motion detection and defence turn on (defence was supposed to spelled as Defense but that's how Chinese programmer spell out. ) Camera crashed on me. I had to do factory reset then finally restore settings and did use motion detection again.

Camera crashed. I redo factory reset. It seem that it havent changed since $200 X10's Airsight HD camera that crashes all the time that I used to have it 6 years ago and couldn't get it refunded. I can pin blame on firmware issue. Motion sensitivity isn't the issue.

Its polling to Email and Alarm flash recording that cause chipset get hot and crashed. I contacted Sricam tech support and they tested my camera and said its fine.

I understand trying to prove them its an issue but camera seem to behave good with tech support. I had motion, email alarm set and defence turned on. And it seem working fine. Then I placed camera in dining room, test the camera and it crashed when motion activity was high. Camera seem to run fine without alarm defence.

I can leave it running for week and monitor when I need to. But using motion detection was my biggest issue. I wanted to use it at night. I will take camera apart and look what kind of chipset it uses.